皇菠萝服务热线:

0531-66729399

黄菠萝动态

联系我们

  • 电话:0531-66729399
  • 15853137666
  • 邮编:250000
  • 邮箱:polo-king@163.com
  • 公司地址:济南工业北路通运汽配城2排18
位置:首页>>黄菠萝动态

黄菠萝动态

轮毂擦伤,轮毂翻新修复具体步骤

时间:2015-07-13 02:16:18 来源:本站 已浏览: 321次

以下是轮毂翻新修复 http://www.polo-king.cn/ 的具体步骤:

The following is the specific steps for the renovation of the wheel hub:

1、检查伤痕,如没有伤至轮毂内侧,可以简单地修补好,使用油漆稀释液,擦拭伤痕周围,去除脏污。

1, check the scar, if there is no injury to the inner side of the wheel hub, you can simply repair and paint using dilution, wipe around the scar, remove dirt.

2、刮伤最深的部分很难去除脏污,这时可用牙签将它彻底弄干净。

2, scratch the deepest part is very difficult to remove dirt, when available, will it completely clean toothpick.

3、为了防止误将无关的部分涂上油漆,最好仔细地将胶纸贴在伤痕的周围。

3, in order to prevent the misuse of the independent part of the paint, the best will be carefully in the tape around the scars.

4、整理好毛笔尖,涂上修饰漆,漆干燥后稍稍收缩,最好涂得稍稍凸出一些。

4, good finishing hair tip, coated with varnish, paint drying shrinkage slightly, slightly protruding some of the best coating.

5、涂装后,待完全干燥大概需要一周的时间。干燥后用耐水纸蘸上肥皂水涂抹,使表面平滑。

5, after coating, to be completely dry for about a week's time. After drying, the surface is smooth with water and water.

6、用耐水纸擦过后,用混合剂擦出光亮,然后再打上蜡。

6, with water after use to wipe, wipe out the mixture of light, then wax.

较深的伤痕,重点是观察金属面是否露出,如果看不见金属面就不会生锈,可以专心地涂上修饰漆。用笔尖一点一点地点上去,然后等漆完全干燥。

A deeper wound, the focus is to observe whether the metal surface is exposed, if you can not see the metal surface will not rust, you can concentrate on the modified paint. Go with one point one NIB point location, then the paint is completely dry.

一键拨号一键导航