皇菠萝服务热线:

0531-66729399

黄菠萝动态

联系我们

  • 电话:0531-66729399
  • 15853137666
  • 邮编:250000
  • 邮箱:polo-king@163.com
  • 公司地址:济南工业北路通运汽配城2排18
位置:首页>>黄菠萝动态

黄菠萝动态

济南快速钣金喷漆的基本步骤

时间:2015-06-11 02:39:12 来源:本站 已浏览: 316次

济南快速钣金喷漆简单来说就是一种车身出现因撞击或者擦伤导致的凹痕或者漆面破损的维修方法,也是目前4S店通行的维修方法,这种方法的维修步骤是:

Jinan fast sheet metal spray paint in simple terms is a body appear damaged due to impact or abrasions dent or paintwork repair method, is currently the 4S store traffic maintenance method, maintenance steps of this method is:

● 钣金处理:车身上的凹陷部位要使之恢复原状必须用锤子敲打及焊接等来完成。

The sheet metal processing: the body of the concave part of to make restitution to hammer and welding to complete.

● 腻子处理:钣金后不平整的地方要用一种黏土(通常说的腻子)东西涂平。

The putty processing: sheet metal after uneven place to use a clay (usually called putty) coated flat things.

● 打磨处理:要用不同型号的砂纸打磨来修整腻子的凹凸面。

The polishing process: convex surface to grinding dressing using different types of sandpaper putty.

● 底层喷涂:为了防止生锈,还需喷涂一层防锈漆。

The bottom spray: in order to prevent rust, still need to spray a layer of paint.

● 调色:在喷漆前,为了使车身颜色一致,需要根据色板来调配漆颜色。

- Color: before painting, in order to make the body color, need to deploy paint color according to color.

● 喷漆:将漆喷涂在损伤面。

The paint: paint spraying on surface damage.

● 烤漆:需要让漆面快速干燥需要让车辆进入烤漆房进行“烘干”作业。

The need to make quick drying paint: paint to paint room for cars to enter the "drying" operation.

● 安装零部件:安装钣金前取下的零部件。

The installation of components: installation of sheet metal parts before take off.

一般济南快速钣金喷漆 http://www.polo-king.cn/ 需要耗时最快2-3天,并且为了保证漆面颜色一致,4S店会将你损害的零件整个进行喷漆,也就是说你车门有一个凹痕,就需要把整个车门进行喷漆,这样做也是避免只针对凹痕喷漆造成色偏。

General Jinan fast sheet metal spray paint takes the fastest 2-3 days, and in order to ensure the paint color, 4S shop will you damage parts of the painting, which means that your car has a dent in it, you need to spray paint the door of, doing so is to avoid only for painting dent caused by hue.

一键拨号一键导航