皇菠萝服务热线:

0531-66729399

黄菠萝动态

联系我们

  • 电话:0531-66729399
  • 15853137666
  • 邮编:250000
  • 邮箱:polo-king@163.com
  • 公司地址:济南工业北路通运汽配城2排18
位置:首页>>黄菠萝动态

黄菠萝动态

济南汽车凹陷修复微划痕的处理方法

时间:2015-06-16 02:21:39 来源:本站 已浏览: 326次

1.清洗

1 Wash

首先要将漆面表层的上光蜡薄膜层、油膜及其它异物除掉,方法是采用脱蜡清洗剂对刮伤部位进行清洗,然后晾干。

First of all to the paint surface polishing wax film layer, oil film and other foreign bodies removed, the method is by lost wax cleaning agent for cleaning the scratch area and then dried.

2.打磨

2 sanding

根据刮痕的大小和深度,选用适当的打磨材料,如1500号磨石,9um的磨片或美容泥对刮伤的表面层进行打磨。打磨一般采用人工作业,也可以用研磨/抛光机或打磨机进行打磨抛光。打时要注意不能磨穿漆面层,如漆面层被磨穿,透出中涂漆层,必须喷涂漆面进行补救。

According to the size and depth of scratches, choose appropriate polishing materials, such as No. 1500 stone, consisting of the disk or beauty mud to scratch the surface of the layer polished. Grinding general use of artificial operations, can also be polished with a grinding / polishing machine or a polishing machine. Play can not pay attention to wear the paint layer, such as the paint layer is worn out, coating, paint spraying must remedy.

3.还原

3 reduction

经打磨抛光的漆面已基本清除浅度划痕,对打磨抛光作业中残留的一些发丝划痕、旋印等,可通过漆面还原进行处理。其方法是:用一小块无纺布将还原剂均匀涂抹于漆面,然后抛光至漆面层与原来的涂层颜色完全一致为止。

Polished polishing paint has been basically clear shallow scratches, grinding polishing operations in the residues of some hair scratches, rotary printing, through paint reduction process. The method is: use a small piece of non-woven fabrics will restore agent evenly coated in paint and then polished to paint layer and the original color of the coating fully consistent so far.

4.上蜡

4 wax

漆面还原后还应进行上蜡处理。济南汽车凹陷修复 http://www.polo-king.cn/ 方法是:先将固体抛光蜡捣碎放入汽油中热溶后备用,修补部位用洁净的棉纱先蘸汽油润温,再蘸蜡涂满后进行擦拭,要反复多次擦拭至漆面平整光亮为止。

Also waxing treatment should finish after reduction. Jinan sunken car repair method is: first solid polishing wax mashed into gasoline thermosol reserve, repair parts with clean cotton first dipped in gasoline moist, then dipped in wax painted after wiping, to repeatedly wipe to finish smooth light so far.

在上蜡时,也可将汽车整个表面同时打蜡抛光一遍。济南汽车凹陷修复方法是:用洁净的棉纱将蜡质全部擦净后,再涂上光蜡,至漆面清晰光泽显目为准。最后用绒布均擦拭一遍即可。

In waxing, can also be the entire surface of the car while waxing again. Jinan sunken car repair method is: with a clean cotton will wax all wipe, then coated with polishing wax to paint a clear gloss conspicuous. Finally, both can wipe cloth.

5.质检

5 quality inspection

上述工序完成后,对修补表面外观质量要进行检查,检查的重点是涂层的色泽必须与原漆面完全一样,若有差异说明表面清理和打蜡抛光没有完全按照要求操作,必要时应进行返工。

After the completion of the process, the appearance and the quality of the surface repair to check, check the focus is the color of the coating must be exactly the same as the original paint, if there are differences that surface cleaning and polishing and waxing not completely in accordance with the requirements of the operation, when necessary, should rework.

一键拨号一键导航